How to Pair the Headset with iPhone

Follow the instructions to pair the headset with iPhone.

Pair the Headset with iPhone
Connect the included iPhone Bluetooth Travel Cable to a USB 2.0 port on your computer (not on the keyboard).
Connect iPhone and the headset to the cable. The headset pairs with iPhone automatically.
The first time you connect the headset, let it charge for about an hour until the status light on the headset turns from amber to green.
Remove iPhone and the headset from the cable.
To connect the headset to iPhone, press the button on top of the headset. This allows calls to be routed through the headset.
In some cases, you may need to reconnect the headset to iPhone.
Reconnect the Headset to iPhone
You can tell that calls will be routed through the headset
if the Bluetooth icon in the iPhone status bar is blue
or white (depending on which application you're using).
If the headset gets disconnected from iPhone, two low
beeps sound from the headset. You can tell that the
headset is disconnected from iPhone if the Bluetooth
icon in the status bar is gray or isn't present.
To route calls through the headset:
Press the button to reinitiate a connection.
If that doesn't work, make sure the headset is turned on,
charged, and in range of iPhone (within about 30 feet).
If that doesn't work, on iPhone make sure Bluetooth is
turned on. From the Home screen, choose Settings >
General > Bluetooth and turn Bluetooth on.
If that doesn't work, pair the headset with iPhone again.
If the headset is paired with other Bluetooth devices,
you'll need to reconnect it to iPhone after turning the
headset on or after using it with one of the other devices.

Make or Answer a Call (Headset iPhone)

Make or Answer a Call
Place the headset in either ear with the microphone
pointed towards your mouth.
Placing the included foam pad over the speaker may
provide a more comfortable fit.
Make a call on iPhone. Press the button on top of the
headset to answer an incoming call.
If you answer an incoming call by tapping the iPhone
touchscreen, audio is routed through iPhone instead.
When you finish, press the button to end the call.
ToDo this
Decline incoming callPress button for about one second, until
you hear a beep.
Switch to incoming or
on-hold call and put
current call on hold
Press button
Switch to incoming or
on-hold call and end
current call
Press button for about one second, until
you hear a beep
Check whether
headset is turned on
Press button. If headset is on, status
light blinks green and headset beeps
Turn headset onPress and hold button for about three
seconds, until you see the status light
blink green or hear four rising tones.
How do I turn off my headset?Press and hold button for about four
seconds, until you see the status light
blink amber or hear four falling tones.
Switch from the Headset to iPhoneTo stop using the headset and hear calls through iPhone
instead, you can either:
Turn the headset off . You can turn it on again at any time to use it with iPhone.
During a call, tap Audio Source on iPhone and choose iPhone or Speaker (for speakerphone).